Delta Faucet Still Leaks After Replacing Cartridge

Cartridge Delta Valve - Both cartridges have been replaced, are still leaking. and now? 3

Delta consumption light with free tea and cold. At least 20 years old. I replaced both cartridges with the appropriate cartridge (which was filmed). Two months later, I had a regular fall. As the cartridge is new, either it is wrong or I have installed it incorrectly. Thoughts? Thank you very much.

You do not need to turn on any faucet to stop the flow.

In that case, there is a problem somewhere.

In your case, it could be the chair.

This is the br-ring on which the cartridge or valve stem is sealed.

It was replaced by Valve Steam.

In fact, they should have been there when you bought them.

You will need a special cheap set removal tool to remove it and install a new one.

Once this is done, your faucet will be as good as new.

And stop turning on the faucet ...

Delta twenty cartridges

The Delta 1700 Series cartridges, which are pressure equalization monitors with anti-scald protection, have two rubber seats and a spring at the end, located inside the valve. You can remove the cartridge and remove the holder and spring and replace them with Delta Set and Spring, part number RP4993. Alternatively, you can replace the entire cartridge, but it costs about $ 69.99. This is the only part you can use to replace the cartridge without a washer. Plumber

Delta Faucet Still Leaks After Replacing Cartridge

Delta connections have springs and seals, not brass seats. The seal has not changed in 30 years, but Bihar has changed it. Remove the cartridge and observe the y valve. You can see the stamps. Remove the seal and the bottom fountain. Take them with you. Use Delta replacement parts as normal parts do not always close properly.
It can fix your drip.
I replaced the cartridges, goggles and gasket and it worked for two days, but the drops came back! And what could happen?