Distance Between Lamp Posts Uk

What is the distance between street lights in the UK? 3

I'm just curious: is there a fixed distance between street lights in the UK? How long?

update

There is a fixed distance!

In August, MOT published its final report on street lighting. In addition to the main road, secondary roads and intersections have also been considered.

Recommendations for streetlights (Group A)

Increasing height. In the center of the light source, 25 feet.

G's usually no more than 150 feet, but occasionally the range can be up to 180 feet. If economically viable, a range of 120 feet may be assumed. It takes less than 150 feet to cut light.

Stand out The minimum distance between two lines should not exceed 30 feet. 6 feet maximum overhang. It should illuminate the sidewalks, sidewalks and adjoining properties.

The amount of light. For roads 12 meters wide or less, the light output should be between 3,000 and 8,000 lumens per 100 meters of road length.

Light distribution The available light reduces the contrast between the brightness of the object being used and its background.

Glare. In the case of non-axial distribution, the ratio of the average value in all directions below the source and the maximum power of the connector between 30 and 45 from the vertical should not exceed 6. With axial distribution, the ratio should not exceed 5

Column position In addition to curves and central suspension, simple side lighting should be avoided.

Recommendations for Group B Public Lighting (Traffic Free Roads)

Due to the large differences that exist for these routes, general guidance is provided instead of specific guidance.

Increasing height. Between 13 feet and 15 feet

No more than 36 meters in G, with a stem of 45 meters on rare occasions.

If it is economically viable then 100 feet should be taken.

The amount of light. Between 600 and 2500 lumens per 100 meters of road.

Light distribution Like Group A.

Glare. In case of non-axial connection, the ratio should not exceed 4.

With axial distribution, the number should not exceed 3.

Column position. With special focus on crossings and crossings, the aerated system is recommended.

™ Â

The minimum light quality required between the lamps can be met, but the desired effect may or may not be achieved. For example, for an average road width of 40 (two lanes and two parking lanes) the DOT lighting system will have 25-40c / 125,150 head lamps on either side of the road. An alternative to this car-based scheme is to reduce the height of the head lamp to 13 and place it at every 50 and vice versa.

Removing normal light