Modulo B Buster 2400
Will my B-Buster 2400 module also be a Shenandoah? 3
I attached a Pioneer 308 to the bridge on it and can hang up on the module that doesn't have qm in ow with more menu related to 20 minutes because it's too hot anyway is normal is it ok what is wrong?
With a certain speed © Scentar or normal module, now with only 20 minutes, ± ± dev schentar too much.
I do a lot of work, take a look at the module connection, not only, and the wiring, there will also be a connection to make a subwoofer, maybe a coliseum module is needed!
It helps!
I will SIM your certificate first when it is too fast for all speakers, it will BRIGDE in parallel ...
imae no mode BRIGDE HATUP Really, this is normal, turn on your normal speaker!
++++
The only plan is not to go down and not to get heavy hair. It looks like it goes down and gets less. It should be taken very seriously. A little better and don't put your module in the open outside the bank. ۔ It warms up even more and is good. This is a useful esp folder.
Make sure the 12V module is really accurate, no house or underground.
Another tip, make sure you don't have a c 12v module installed to find or fix this account:
2400 watts divided by 3.5 or in this case the result is power in RMS = 685 watts RMS
Distribute Vogue You will have 685/13 volts at a price of 52 amps ... It is reported that the summer presentation runs fvel 52 amps
Repeat the wire, if too thin, or the modules try to set the current too high due to the low resistance wire.
