Moving Ac Unit From Roof To Ground

Can I move my air conditioner from ceiling to floor?

I have another apartment, with air conditioning on the roof, low air conditioning when the temperature is above 100 degrees. I have heard that air conditioners need to be protected from direct sunlight. Can I put the air conditioner on the floor? Which tube / cable connects the air conditioner to the room? What are the components of a rooftop air conditioning system?

As you said it is a condominium, you will need permission from one or both buildings and condominium to move like this. It is unlikely that you will get approval for this project. If the roof unit has seasonal issues with other tenants, you should ask the COA to install a sun visor.

Moving Ac Unit From Roof To Ground

You are talking about moving the condenser from the ceiling to the floor. Well, it can be very expensive. Freon lines need to be extracted and removed, routed and reconnected, then emptied under vacuum so that only a certified CA technician can legally purchase enough Freon to legally charge the device and the appropriate tools to do so. I am Meanwhile, 220 power lines had to be installed and relocated. Most likely, you will have to place the capacitor on the concrete slab.
It is cheaper to put an umbrella over the capacitor just to protect it from the sun. As long as the condenser has enough space to let in cool air and let it out. But yes, I understand why you are trying to jam your capacitors. But I'm not sure you can just take the roof unit and put it on the floor.
The sun has nothing to do with it. The problem is that your device needs to be fixed. AKA cleaned and checked for proper loading. The coils need to be cleaned on the roof.
Even if you use cheap mesh or washable filters on them. Maybe your vaporizer coil. The coils (assuming the correct load) with cheap filters (you guessed it) and evaporator coils provide a high cooling capacity.
The cost of moving the device will be very, very expensive. New electrical use (copper tube) and electricity.
When everything is checked, it is the load factor, heat, and insulation. R + you both increase the heat.
Recommends creating a shadow for the condenser, but does not eliminate the air flow used to cool the device.