Thompson's Water Seal Still Tacky On Concrete
tmpsons board not drying? 3
I sprayed my yard with Tmpsons Water Seal about 2 weeks ago. It starts to dry in 3 days. However, when the sun now hits the deck, the surface will glow and look very wet. Am I spraying too hard? Will it ever dry out? and now?
Wait a few weeks and try to keep up with what happens. Sometimes it can be too shiny and significantly longer than the standard drying time if your coat is too thick or too thick. This can also happen if the temperature drops during application or if the surface is not 100% dry on application. In my experience they sometimes need to be removed and reapplied, but sometimes it takes a week or two for the stickiness and shine to harden.
If your application is a bit difficult then this is fine. I think with this material, as with many stains and other sealants, a coat is usually recommended and a second coat after T can be applied if you want a darker color or extra protection. Knowing in advance that you will be doing two coats, the first will be easier and the second will be a little heavier. If you've been to 3 or more times, don't expect too much. Now you are asking the flour to stick to the flour if it is going to ■■■■■■■■■ the wood. Now your cices will either have to redo it immediately or wait a few months to do some removal work for you and then repeat it after removing most of it. Whenever I find something like this, I try to stay in shape during peak season and do it again next year. After a week or two of hard work, I don't want to repeat it.
I have the same problem. I applied this sealant to my yard 2 days ago and it still works! Difficult to use with sprayer recommended in instructions. The chemical is sticky and does not evaporate well. Leaves stains on vinyl walls. After spraying, I have to spread it on the deck board with a roller. I'm really worried it won't dry out. Above 5060 degrees. I can still see the light. I will go with you in four days. I'm sure it will dry out or I will never buy from Tmpson uct.
As in the past, I sealed my brick yard with Thompson water. 3 days have passed and it still works. This has never been a problem before. No suggestions? Dorothy
You did not match it correctly. If left unmanaged, they can be left astray and lose the right path. Turn off the pressure wash and experiment. First you need to delete the previous layer.
